Optional Accessories and Parts
"Facetron" is a trademark of Jarvi Tool Company
INDEX GEARS
 | |
|---|---|
| INDEX | PRICE |
| 32 | $78.50 each |
| 64 | <$78.50 each |
| 72 | $78.50 each |
| 80 | $53.50 each |
| 84 | $78.50 each |
| 88 | $78.50 each |
| 96 | $78.50 each |
| 99 | $78.80 each |
| 120 | $78.80 each |
| Oval | No longer available |
| Set of any four | $280.00 |
| Set of any five | $335.00 |
| Set of any six | $360.00 |
Shipping weight for each Index Gear is 1/2 pound.
| D O P S
Your choice of flat, cone, vee, or vee for pears (keyed 90 degrees) Please specify! 
Full Set of 27 dops is available below | |
|---|---|
| SIZE | PRICE |
| 2mm | $15.80 each |
| 3mm | $15.80 each |
| 4mm | $15.80 each |
| 5mm | $15.80 each |
| 1/4" | $15.80 each |
| 3/8" | $19.75 each |
| 1/2" | $19.75 each |
| 5/8" | $21.50 each |
| 3/4" | $21.50 each |
| 1-1/4" for extra large stones | No longer available |
| 1-3/4" for extra large stones | No longer available |
| 15 Assorted Dops 1 of each: 4mm, 5mm, 1/4", 3/" & 1/2" flat, cone, & vee | $146.50 |
| Full Set of 27 Dops | $350.00 |
Shipping weight for 1 to 5 Dops is 1 pound.
Shipping weight for 6 to 12 Dops is 2 pound.
Shipping weight for 13 to 27 Dops is 3 pounds.
| OTHER ACCESSORIES | |
|---|---|
| ITEM | PRICE |
| Learning to Facet in the 21st Century Using the Facetron by Jim Perkins
Shipping weight is 1/2 pound | $44.95 |
| Variable Axis Preformer with eight cams
No longer available Shipping weight is 4 pounds ...Add $72.50 for motor Shipping weight is 2 pounds | $295.60 |
| Apex Indexer (for faceting designs on tables) Shipping weight is 1/2 pound | $19.95 |
| Compounder Block
No longer available Shipping weight is 1/2 pound | $47.95 |
| Universal Mast
Shipping weight is 1/2 pound | $79.95 |
| Diamond Dop (mechanical claw for recutting diamonds) No longer available | $59.50 |
| Saw Stabilizers for 4" blade (1 required) No longer available Shipping weight is 3 pound | $12.70 |
| Saw Stabilizers for 6" blade (2 piece set) Shipping weight is 3 pounds | $35.50 |
| Corian Lap by Facetron
No longer available Shipping weight is 3 pounds | $96.00 |
| Meehanite Cast Iron Lap for polishing hard stones No longer available Shipping weight is 4 pounds | $223.00 |
Mast Riser 1" (for cutting extra large stones) Shipping weight is 2 pound | $43.50 |
| Special Cut Machine for concave, vee, round and groove cuts No longer available Shipping weight is 7 pounds | $775.00 |
| Controller Converts AC to DC Clean rectification 120v or 240v Shipping weight is 3 pound | $97.50 |
| Controller Kit Assembled controller includescontroller with speed control knob, switch plate, reverse switch, power chord, soldered and ready for wiring to motor. Shipping weight is 5 pound | $319.50 |
| REPLACEMENT PARTS | |
|---|---|
| ITEM | PRICE |
| Acculine Transfer Stand Shipping weight is 2 pound | $136.70 |
| Water Tank Shipping weight is 1 pound | $59.00 |
| 45 Degree Table Dop Shipping weight is 1 pound | $63.00 |
| 90 Degree Table Dop Shipping weight is 1 pound | $67.50 |
| Urethane Splash Bowl Shipping weight is 1 pound | $59.50 |
| Padded Lap Nut Shipping weight is 1/2 pound | $26.95 |
| Target Dop Shipping weight is 1/4 pound | $18.90 |
| Dop Chuck Wrench Shipping weight is 1/4 pound | $18.50 |
| Gates Polyflex Belt Specify: #5M-437 or #3M-437 Shipping weight is 1/4 pound | $19.70 |
| Oak Wood Base Shipping weight is 5 pounds | $115.95 |
| Lap Assembly Shipping weight is 5 pounds | $199.50 |
| Complete Head w/ digital, sensor, & camlock dop chuck Shipping weight is 6 pounds | $1889.95 |
| Mast w/ micrometer adjuster and 360 degree swival Shipping weight is 3 pounds | $340.00 |
| Aluminum Base complete w/ motor, platen, & controller Shipping weight is 8 pounds | $997.50 |
| Motor 1/3 HP Hi-Torque PM variable speed & reverse Shipping weight is 5 pounds | $157.50 |
| Owner's Manual and Facetron's Gem Cutting Instructions No longer available Instead, We provide the book listed below by Perkins Shipping weight is 1/2 pound | - |
| Learning to Facet in the 21st Century Using the Facetron by Jim Perkins  Faceting on Facetron. Step-by-step cutting instructions and diagrams are presented in sequential lessons for four basic gemstone designs: a round brilliant, a standard round brilliant, a center-point oval and a trillion. Also provided are cutting diagrams for eleven additional designs including five round brilliant variations, an apex crown octagon, a lazy oval, an apex crown trillion, a cut corner rectangle, and two square cushion designs. This is an excellent resource for not only Facetron owners but anyone interested in starting out in faceting. Book comprises 63 comb-bound pages (A4 size) Author: Charles James Perkins Copyright: 2008Shipping weight is 1/2 pound | $34.95 |
Facet Cutters Handbookby Edward Soukop Everything one needs to know in order to facet a gemstone. Has 22 different designs to cut. 64 pages This is the book that most new facetors start with. sent separately at an additonal S&H cost of $4.50 | $11.30
|
