For Lapidaryists, Jewelers, Reloaders, Manufacturers, and Hobbyists.
A vibratory tumbler can save you time and money. Unlike rotary tumbling, where just the top, sliding layer of the load is being worked, the entire load in a vibratory tumbler is ground or polished continuously. This makes the finishing time shorter. Vibratory tumbling also has the advantage of retaining the overall shape of pieces better while removing imperfections such as burs. In gem production, vibratory tumbling is preferred for preforms where shape must be retained.
1.5 Liters
Maximum load
capacity
5 pounds
with grit
RaytechModel TV-5
This economical, versatile, popular, low cost unit is a favorite among hobbyists and is used commercially as well. It holds 25 ring castings with media or will process about 4 pounds of rock. The diameter of the bowl is 8". It has a new convenient solid lid system. 3000 cycles per minute at 60 Hz or 2500 cycles per minute at 50 Hz. 1/57 HP motor. Bowl measures 7" across and 3-1/8" deep.
Shipping weight 7 lbs.
Extra bowl, lid, and stem system (ship wt. 2 lb)...$25.00
Not recommended for continuous industrial use.
| Bowl's Max Volume | |
| Media | Pounds |
| Ceramic/Porcelain | 5 |
| Plastic | 3 |
| Dry Compounds (Wood) | 1 |
A Complete Kit is available
Comes complete, ready to operate, with a motorized base (TV-5), two (2) bowls, clear lid,
(2) rubber nuts and all the grits necessary for accomplishing the grinding step through the final
polish step of most gemstones. The (4) steps that are included are Silicone Carbide (100/120),
Silicon Carbide (700F), Iolox 50, and Raybrite TL.
Shipping weight 16 lbs.
An ideal gift for that SPECIAL someone.
$114.95
for 110v
$136.95*
for 230v
50Hz
Tumbler
with Kit
$154.95
for 110v
$169.95*
for 230v
2.8 Liters
Maximum load
capacity
10 pounds
with grit
RaytechModel
TV-10
Shipping weight 14 lbs.
Extra bowl and cover (ship wt. 4 lb)...add $90.00
Not recommended for steel media processing.
| Bowl's Max Volume | |
| Media | Pounds |
| Ceramic/Porcelain | 9 |
| Plastic | 6 |
| Dry Compounds (Wood) | 2 |
for 110v 60Hz
$275.95*
for 230v 50Hz
3 Liters
JSPRemovable polyethylene bowl with lid. Has 1.6 amp ball bearing thermally protected Heavy duty motor which creates 3000 rpm.
Shipping weight is 13 lbs., 1.80 cu.ft.
for 110v
60Hz
$389.00
for
Heavy Duty
220v 50Hz
3.6 quarts
3.4 Liters
RaytechDri Polisher
Shipping weight 9 lbs.
Extra bowl with lid (ship wt. 3 lb)...$43.95
for 110v 60Hz
$169.95*
for 230v 50Hz
RaytechTV-18
No Longer Available
Extra heavy-duty bowl with drains and lid (ship wt. 6 lb)...$90.00
5.7 Liters
Maximum load
capacity
18 pounds
with grit
RaytechAV-18
Heavy Duty with Drains
The former TV-18 has been redesigned to a much heavier duty machine and is now the AV-18 which features adjustable amplitude, provides inlet and outlet ports for compound rinsing and has a capacity of .18 cubic feet. Shipping weight of 22 lbs., 2.13 cu. ft.
This batch tumbler, having 0.15 cu. ft. capacity, can hold about 16 pounds of rock, or 200 to 700 shell cartridges.
Bowl diameter is 12". Excellent unit for jewelry processing or metal parts.
Extra bowl with drains and lid (ship wt. 6 lb)...$195.00
| Bowl's Max Volume | |
| Media | Pounds |
| Steel/ss | 18 |
| Ceramic/Porcelain | 13 |
| Plastic | 8 |
| Dry Compounds (Wood) | 4 |
for 110v
$480.00*
for 230v 50Hz
6 Liters
JSPHeavy duty removable polyethylene bowl with lid. Has 1.6 amp ball bearing thermally protected Heavy duty motor which creates 3000 rpm.
Shipping weight is 17 lbs., 3.80 cu.ft.
for 110v
60Hz
$437.00
for 230v
50Hz
7 Liters
RaytechModel AV-25
Has all the features of larger machines. A popular size for small production lots. The AV-25, when used with the Raytech FT-20 Compound Rinsing System, accomplishes a myriad of applications. Designed with heavy duty drive and suspension system and additional adjustable amplitude. When steel burnishing is required, see the Model 25SS below. Machine bowl is equipped with noise dampening cover and liquid drain. Shipping weight of 24 lbs., 2.13 cu. ft.
Bowls are made of tough cross-linked polyethylene. Bowl 9-1089 (BS-20) should be used when steel media is used. 1500 cycles per minute at 60 Hz or 1250 cycles per minute at 50 Hz. Bowl measures 14" across and 5¾" deep. 1/6 HP motor
Extra bowl and cover (ship wt. 11 lb)...$230.00
SPECIAL ORDER item; allow two to three weeks.
| Bowl's Max Volume | |
| Media | Pounds |
| Steel/ss | 30 |
| Ceramic/Porcelain | 20 |
| Plastic | 14 |
| Dry Compounds (Wood) | 7 |
for 110v
$620.00*
for 230v
50Hz
7 Liters
Raytech
Model AV-25SS
The Model 25SS is specifically designed for use when steel/ss media processing is required. Incorporates all the features of the standard model 25 except machine is equipped with a discharge port for easier unloading. All medias can be used. Has a full ¼ cubic foot capacity that is equipped with heavy-duty drive, liquid drain, and adjustable amplitude. Bowls are made of tough cross-linked polyethylene. Bowl 9-1089 (BS-20) should be used when steel media is used. 1500 cycles per minute at 60 Hz or 1250 cycles per minute at 50 Hz. Bowl measures 14" across and 5¾" deep. 1/6 HP motor
Shipping weight 24 lbs.
230v 50 Hz export model....add $35.00
Extra bowl and cover (ship wt. 11 lb)...$250.00
SPECIAL ORDER item; allow two to three weeks.
| Bowl's Max Volume | |
| Media | Pounds |
| Steel/ss | 30 |
| Ceramic/Porcelain | 20 |
| Plastic | 14 |
| Dry Compounds (Wood) | 7 |
for 110v
$675.00*
for 230v
50Hz
15 Liters
Maximum load 35 pounds.
AV 40
Has the removable heavy-duty polyethylene bowl with lid. Thermally protected, 1/3 HP motor Bowl measures 17" across.
Tumble Dump Setup (Model TD40)* ....add $340.00
Extra bowl and lid (ship wt. 20 lb)
B-40 ...$305.00
SPECIAL ORDER item; allow two to three weeks.
for 110v
$1155.00*
for 230v
50Hz
15 Liters
Maximum load 35 pounds.
AV 40SS
The Model 40SS is specifically designed for use when steel/ss media processing is required. Has all the features of the model 40 except the machine is equipped with a discharge port for easier unloading. Capacity of steel/ss media: 100 pounds. All medias can be used.
Has the removable heavy-duty polyethylene bowl with lid. Thermally protected, 1/3 HP motor Bowl measures 17" across.
Shipping weight is 52 lbs., 5.06 cu. ft.
Extra bowl and lid (ship wt. 20 lb)
B-40SS ...$345.00
SPECIAL ORDER item; allow two to three weeks.
for 110v
$1175.00*
for 230v
50Hz
18 Liters
JSP with flow thru
Heavy duty removable polyethylene bowl with lid. Has 1.6 amp ball bearing thermally protected Heavy duty motor which creates 3000 rpm.
Shipping weight is 27 lbs., 7.00 cu.ft.
for 110v
60Hz
$1159.00
for 220v
50Hz
20 Liters
Maximum load 70 pounds
AV 75
The Model 75 vibratory tumbler is a full .75 cu. ft. capacity machine that offers increased productivity over other Raytech models. The machine is equipped with a heavy duty drive system that includes convenient amplitude adjustment. The Model 75 also includes the same features of the Model 40, including the Tumble Dump™ feature (Model TD) for fast, easy unloading. AV-75
shipping weight is 66 lbs., 9.18 cu. ft.
Tumble Dump Setup (Model TD75)*....add $340.00
Extra bowl and lid (ship wt. 30 lb)
B-75 ...$526.51
SPECIAL ORDER item; allow two to three weeks.
for 110v
$1,465.00*
for 230v
50Hz
20 Liters
Maximum load 70 pounds
AV 75DC
This model is the same as the standard Model 75 and TD-75. The Model 75DC and TD-75DC features a discharge port for easier unloading when combined with our Manual Separating Screen Set.
Will hold 70 pounds of ceramic, 52 pounds of ceramilite, 44 pounds of plastic and 24 pounds of Dri-Shine media. The model 75 is a full .75 cu. ft. capacity machine that offers increased productivity over the other Raytech models. The machine is equipped with a heavy duty drive system that includes amplitude adjustment.
Shipping weight is 69 lbs., 9.18 cu. ft.
Tumble Dump Setup (Model TD75DC)*....add $340.00
Extra bowl and lid (ship wt. 32 lb)
B-75DC ...$526.51
SPECIAL ORDER item; allow two to three weeks.
for 110v
$1,495.00*
for 230v
50Hz
