|T R I M S A W S|
|Great for cutting and trimming gemstone rough into pieces ready for faceting and/or cabbing|
|Size||Name or Brand||Description||Price|
Grave's Faceter's Saw
Check for Availability.
|The Best Value 4" Saw On The Market.
Built especially for the faceter who needs to cut small pieces of rough. This unit comes complete with a sump, table, motor, variable speed foot controller and splash shield. The variable speed foot controller allows your hands to be free to do other operations. The motor produces 5,000 RPM for efficient cutting. Compact size 7" x 10-3/4" x 5" high. 9 pounds. 110 volt. Accepts 4" diamond blades between .004 to.025 inches thick with a 1/2" arbor. Recommended lubricants are Dia Cut or Aqua Oil.
No saw blade included.
Shipping weight 10 lbs.
Tiny Trim Saw
formerly Coffee's Tiny Trim Saw
Check for Availability.
|Has a high speed, 3,000 RPM, 1/15 HP continuous duty motor, motor shaft adapter for direct drive.
COMPACT, PORTABLE, VERSATILE! All major parts are cast aluminum.
1/2" arbor. Has a 3-wire cord and a switch.
Comes with 4" X .012" Pro-slicer diamond blade.
Shipping weight 12 lbs.
This trim saw is the perfect tool for cutting your valuable faceting material or pre-forming cabochons. The large table top (measures 6in. x 10in.) is so easy to trim slabs and removable so clean up is easy. The saw housing is made of unbreakable cross-linked polyurethane, non-rusting, no messy oil, uses water only. The 1/4HP equivalent variable speed ball bearing direct dirve motor allows he saw to run fast enough to ultra thin diamond blades and is powerful enough for sintered diamond blades. RPM 500-3450.
Comes with vice and saw blade 4in. x .015 x 5/8in.
Instruction manual: online
Shipping weight 18 lbs.
List is $446
|The perfect machine for trimming and cutting
out cabochons, making performs, and trimming valuable faceting rough.
Accepts 4" or 5" saw blade that has a 5/8" arbor hole.
Has a large saw table that is 10" x 6" and has no inhibiting lip.
Easy to trim oversized slabs.
A rust-free housing made with unbreakable, cross-linked polyethylene.
Housing and all plastic parts are guaranteed for life; non-rusting, no messy oil, and uses water only.
The heavy duty ¼ HP equivalent variable speed ball bearing direct dirve motor allows the saw to run fast enough
for ultra thin diamond blades and is also powerful enough for sintered diamond blades.
Variable speed operates from 800 rpm and can go as high as 3400 rpm.
Removable table top is very easy to keep clean.
Comes with complete written and visual instructions and a 4-inch saw blade .015 x 5/8 inch.
Power needed is 110v.
Machine dimensions: 10" L x 14" W x 7" H
Country of origin: USA
Shipping weight 15 lbs.
List is $395
Add $45 for
Lapcraft's L'il Trimmer
|Made of cast aluminum. It's FAST, QUITE, LIGHT, and PORTABLE.
Will take a 4" or 5" diamond blade. It's easy to clean and maintain. Add coolant by simply raising the saw table. On/Off switch conveniently mounted on 1/15 HP, 3,000 RPM motor.
Comes with a 4" x .012 x 1/2" DIA-LAZER diamond blade (stainless steel core, corrosion resistant, water coolant okay) Plus 8 oz. of coolant concentrate.
Shipping weight 15 lbs.
|List Price $437.50|
your price $395.00
Raytech's Jem 45
|Features a high-torque motor, 3,000 RPM for better cutting and longer blade life.
Versatile machine accepts a 4" or 5" diamond blade.
Drop edge table eliminates interference on slab cuts. "ON CENTER" trimming allows maximum accuracy.
Innovative guard design for slab cuts of any length, convenient LIFT-OUT sump liner for easy cleaning.
Front splash shield included. Comes with a "Yellow Blazer" 5" x .012" x 5/8" diamond blade.
Overall dimensions are 12" x 12".
Shipping weight 16 lbs.
Optional vise...add $68.00 Ship. wt. 2 lbs
Optional lamp and mounting stud...add $49.95 Ship. wt. 5 lbs
Optional trim table attaches in seconds...add $45.00 Ship. wt. 2 lbs
|List price $599|
Your price $560.00
|Most popular trim saw made today.
Economical, durable and quality built.
Cast aluminum design housing with blade guard and splash shield, drive belt guard as standard equipment.
Table size measures 7-1/2" x 10-1/2", with sealed bearings capable of high speeds when using a thin diamond blade. (.006 or .012).
Has a 5/8" shaft shouldered to 1/2".
No motor or diamond blade included. Shipping weight 8 lbs.
Optional Kit 1/4 HP 1725 RPM motor w/ cord, pulley, and 15" v-belt, 6" x.025 x 1/2" Pro-Slicer diamond blade ... add $183.00
Ship. wt. 22 lbs.
Optional vice ...add $27.95 Ship wt 2 lbs
Extra Plastic Hood. ...add $79.95 Ship wt 3 lbs
Extra Shaft and Bearings. ...add $49.95 Ship wt 1 lb
This 6" trim saw is ideal for trimming rough faceting material, opals, and rock
slabs of all types. This unique 1/4 HP variable speed motor with
sealed ball bearings allows for low and high range of 400-3450 RPM's.
It has a large working table area measuring 15" x 9" and having no inhibiting lip.
This makes it easy to trim oversized slabs. The rust-free housing is unbreakable.
It is made of cross-linked polyethylene. Housing and all plastic parts are guaranteed
for life. Utilizes a 5/8" arbor shaft.
Complete unit comes with 6” x .013 x 5/8” diamond blade.
Machine dimensions: 18" L x 18" W x 11" H ;
Made in USA
Shipping weight 22 lbs.
Fence accessory ...add $30 Ship. wt. (2 lb)
This accessory is very useful and aligns your stones for precision cutting.
Simply attach it onto your 6" Trim Saw Machine table, secure the wing nuts and begin making perfect gem stone cuts.
Vice assembly ...add $100 Ship. wt. (2 lb)
|List is $449.00|
Your price is $399
Master Trim Saw
No Longer Available
|Features an all cast aluminum construction, accurately trims slabs for cabochon cutting. Large 8" x 10" swing up table top and removable splash guard. Stainless steel shaft and separate sealed ball bearings for longer life. A 5/8" shaft shouldered to 1/2" for diamond blades. Optional vice (2 lbs)...|
no motor or vice
from Diamond Pacific
|Has unique features.
The Wizard-4G makes a full 6” cut of a slabbed piece. Fairly large slabs can be trimmed simply by turning them to cut from opposite directions.
Uses water as a coolant instead of an oil based coolant. Water is cheap, non-toxic and easy top clean up. No messy oils.
The pan and table can be easily detached for easy clean up. Just turn a knob and remove.
The housing is stainless steel powder coated for good looks and long life.
The saw pan and table are molded from sturdy ABS plastic that is easy o clean and gives years of service.
The high torque motor has plenty of power for trimming any hardness of rock.
The motor has ground fault circuit interrupter to protect against electrical shock.
The unique angle block included with trim saw allows one to finish-trim the edges of your cabs at ten degree angle, giving one a head start towards grinding the bezel of your cab.
Measureas approximately 12” from front to rear and 13” from left to right.
Its convenient size makes it easily transportable. Weights only 125 pounds. Comes with a handy carrying handle built in.
Uses saw blades that have 5/8” or 1/2” arbor hole. Blade not included.
Comes with a sample bottle of water aid, angle block, and safety goggles.
$749.00 115V 60Hz
Does not include diamond blade.
Shipping weight 22 lb.
Optional Blade 6"x .014 x 5/8"..add $51.00 ship. wt. 1 lb
Optional Blade 6"x .020 x 5/8"..add $53.00 ship. wt. 1 lb
Optional Blade 6"x .032 x 5/8"..add $55.00 ship. wt. 1 lb
Optional Blade 6"x .040 x 5/8"..add $59.00 ship. wt. 1 lb
Optional Transformer...add $78.75 Ship. wt. 1 lb
Optional Rip-Fence Attachment ..add $75.00 Ship. wt. 1 lb
Extra Replacement bulb for lamp...add $15.50
List price $795.00
230V 50Hz Export Model
Buy from us and save $50.00 off the above price
|Engineered for extremely fast, precise cutting at HIGH SPEED
for the hardest of agate and precious gemstones.
Features a spacious 11" x 13" steel workable and unique industrial flat belt drive
for rapid, quick, and accurate cuts.
A hinged work table and large slide-out coolant tank gives cool cutting and easy cleaning.
Requires 2 quarts of coolant (not supplied).
Comes complete with 6" x .012 vanguard thin rim diamond blade, 1/3 HP motor, cord with switch, pulley, drive belt, splash shield and blade guard.
Shipping weight 66 lb.
|This unit is made of heavy-duty steel.
It has sealed ball bearings, a large work table (10-1/2" x 15"),
a splash shield, and an arbor pulley. The 3/4" shaft is shouldered to 5/8" at blade end.
Screws hold table top securely over sump.
A plastic hood is open on all sides for access during trimming or cutting operation.
The vise that comes with this machine bolts down to table for easy operation and use.
Comes complete with 1/3 HP motor, pulley, vice, and a 8" x .032 MK diamond blade. Shipping weight 77 lb. Comes in two boxes.
Stainless steel unit....Add $90.00
Extra Slabbing Vise...add $45.00 ship wt 2 lbs
Extra 8"Plastic Hood...add $49.00 ship wt 3 lbs
Gemstones | Gemstones | Birthstones | Wedding Aniverseries | FamousPeople Settings
Faceted Stones | Beryls | Chrysoberyls | Fire Opals | Garnets | Quartz | Peridot | Rubies and Sapphires | Spodumenes | Spinels | Tanzanites | Topaz | Tourmalines | Zircons
Opals | Black | Black Crystal | Boulder | Contra Luz | Crystal | Crystal with Matrix | Doublets | Fire Gray | Gray Crystal | Matrix | Hydrophane | Regular | Semi-black | Semi-crystal | Triplet Opals
Cabbed Stones | Carved Stones | Collector Stones | Phenominal Stones | Synthetics
Beryl Rough | Chrysoberyls | Collector Stones | Emeralds | Fire Opals | Garnets | Information | Spinels | Tanzanites | Tourmalines
Diamond Ring Diamond Ring Pendants Personalized Wedding Bands
Custom and Foreign
Polished Rock | Tumbling Rough
Faceting | Gemstones | Tumbling | Carving
Bead Mill | Diamond Testers | Info & Index | Flat Laps | Flexible Shaft | Faceting Machines | The Facetron | Facetron Parts | The Titan | The Genie | The Pixie | Slab Saws | Sphere Machines | Sphere Preformer | Spool Polisher | Trim Saws | Single Barrel Tumblers | Ultraviolet Lights | Vibrating Laps
Double Barrel Rotary | Drill-type | Lot-O | Single Barrel Rotary | Triple Barrel Rotary | Vibratory
Dia. Discs(Crystalite) | Dia. Discs(Lapcraft) | Dia. Discs(China) | Dia. Drills | Dia. Saw Blades(China) | Dia. Grind Wheels | Dia. Sand/Polish Wheels | Displays and Gem Tray Cases | Dyna Disks | Faceting Accessories | Faceting Kits | Gem Powders | Glue | Grit & Polishing Materials | Information | Lubricants Coolants | Polishing Laps | Tumbling Media | Tumbling Rough | Ultralaps
Cabbing | Faceting | Geology | Jewelry | Rockhound Kit | Gold Panning Kit
Gem Cutting & Polishing | Appraisals | Consignment
Prepare Cast Iron Lap | Prepare Ceramic Lap | Dop | Cut Opals | Treat Opal | Tumble
Don't Go Here!
Been deceived | Status
Tucson Show Guide | Tucson Show Guide 2 | Tucson 2001 | Blythe 1998 | Congress Street Expo 1998 | Quartzite 1998 | Tucson 1998
Banners | Business Cards | Specials | Discounts | Comments | Comments 1998 | Comments 1997 | Comments 1996 | Collecting and Investing | Sponsor | Home
Antique Gas Signs | California Lottery Collection | Chandelier | Giant Wrenches | Greeting Bags | Links | Loquats | Loquat Trees | Resort Timeshare-Oregon Coast | Resort Timeshare-Tahoe | "Six Queens" Gold Coin | Skull-Water Buffalo | Silver Coins | Search Engines