|
L A P I D A R Y
S L A B S A W S | |||
|---|---|---|---|
|
Great for cutting slabs, facing mine rough, slicing petrified wood, preforming spheres, making clocks, bookends, etc. Can also be used for cutting glass and core samples | |||
| Size | Name or Brand | Description | Price |
| 12" |
Lortone |
A fully enclosed, professional 12" slabbing saw.
It has a fully adjustable precision carriage, sealed ball bearings on both arbor and carriage,
and independent fixed rate power feed with automatic shut-off and safety switch.
It also has a positive compression vice and a large capacity threaded crossfeed.
The fully hinged hood has a safety glass window.
The detachable coolant tray makes for easy cleaning.
This machine will cut up to 12 slabs from a 5" x 7" piece of rough without repositioning
and runs cleanly enough to operate in the kitchen.
Requires 2 gallons of coolant.
Comes complete with 1/3 HP motor and a 12" x .040 x 5/8" arbor MK-297 diamond blade. Shipping weight 115 lbs (2 boxes). Allow 2 to 3 weeks for delivery. |
List Price $1,525.00 Our Price $1,395.00 |
| 14" |
Lortone Panther LSS-14P |
The remarkable PANTHER TM high performance slab saw delivers straight, smooth cuts in the hardest of agate or wood at twice the speed of standard saws. It has sealed high-performance bearings, high speed fixed-rate power feed, rugged 5-1/2" x 6-3/4" capacity vise, 4-1/4" threaded crossfeed, separate blade sharpened vise, 1/2 HP heavy-duty motor, 14" x .070 x 5/8" PANTHER High Performance diamond blade (50% higher blade RPM). This unit has a removable bottom pan for easy cleaning, a side window to check on cutting progress, and an automatic shut-off switch with safety switch. Requires 2.5 gallons of coolant oil. Shipping weight 170 lbs. (2 Boxes) | List Price $1,885.00 Our price $1,730.00 |
| 18" |
Lortone Model LSD 18 |
This saw is a rugged, precision, economical 18" slab saw proven by years of trouble-free performance in hobby and commercial operation. The frame, tank, and hood is constructed of heavy gauge welded steel. It has adjustable leveling feet. The cast aluminum vise carriage opens to 7-1/4" and rolls smoothly on 9 sealed ball bearings over 1" diameter steel carriage ways. It has an adjustable screw action 4-1/2" crossfeed, 3 positive power feed speed options with hinged power drive guard and automatic cut-off and safety switches, double sealed ball bearings, 3/4" arbor, and a drain plug. It is shipped complete, assembled, and ready to use. Requires 3-1/2 gallons of coolant oil. Shipped by freight only. Comes with 1/2 HP heavy duty motor, and an 18" x .064 diamond blade with x 3/4" center hole. Shipping weight 225 lbs. FOB Seattle, Washington. | List Price $3,750,00 Our price $3,495.00 |
| 18" |
Diamond Pacific TR-18 These machines will be drop-shipped directly to you by Diamond Pacific |
Easy to operate. Reliable performance cut after cut.
See details and closeups of this rugged industrial type slab saw with features that make it the best saw available today.
Precision is the key word in the manufacture of the systems components.
Exacting tolerances insure perfect matching of hardened bearings, rollers, and rails.
The factory alignment of rails to the blade is within .015".
The estimated life of these components is approximately 2500 hours.
All components are readily accessible for preventative maintenance, minor adjustments and replacement, if required.
The "V"-Guide Rail System is standard equipment on this machine.
The powerglide hydraulic feed system cuts faster than any screw fed system.
Cutting agate at about 3 square inches per minute and onyx at about 10 square inches per minute.
Stones of other hardness fall between these figures.
The filter and recirculating system of this machine is capable of moving large volumes of
clean oil over the cutting surface while cooling and lubricating at the same time.
The system consists of a 9 gallon holding tank with 3 settling chambers, filter,
submersible pump, coolant guide tubes and saw wash attachment.
Has a 1" arbor shaft.
The heavy duty 15-gal capacity tank is made of 3/16" steel plate and measures 43.75" long by 26.75" wide by 14.75" deep;
The hardened faced jaws of the vise open up to 8" and the crossfeed is 6-1/2".
It comes with a 1 HP heavy duty motor, hydraulic feed and 3-stage filter and recirculation systems. Overall height is 43", vice opening is 7", and depth of cut is 6-1/4" with 5" flange. Shipping weight 670 lbs. Crating fee (extra)...add $380.00. Allow 3 to 4 weeks prior to shipping. The 1HP motor 110v requires a 20 amp circut and a NEMA 5-20R recepticle. [Diamond Pacfic no longer includes a blade. Blade must be ordered separately.] We recommend the 18" BD-303 Professional Saw Blade .085 rim thickness... add $356.00 However, if you want to cut hard materials such as agate and petrifired wood with unprescedented speed, We suggest obtaining the BD-301 Supreme Notch Rim having a .085 rim thickness... add $478.00 Add 8 lbs ship. wt. per saw blade. The saw should be used with oil as a coolant. We recommend using Roc-Oil, a food grade mineral oil... add $30.50 per gallon Add 10 lbs ship. wt. per gallon. |
$7,750.00 110V 60 Hz $8,100.00 220V 50 Hz Buy from us and save $250.00 off the above prices |
| 18" | Covington Heavy Duty A Great Saw for the Price |
Covington makes high performance saws for cutting glass or stone. The heavy welded steel chassis with separately welded inner frame eliminates warp. The one piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads. A quick return system which allows the carriage to be manually returned to any position. A six speed power feed with automatic shutoff. Over running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through stone. A wide cross feed which permits 8" of material to be slabbed without reclamping. A one piece arbor and flange mounted in housing with grit slinger. Heavy duty ball bearings, neoprene sealed and greased for life. Completely assembled with 9" vise, 1/2 HP motor, and an 18" Gold Diamond Blade (.064 Core/.094 rim, 1" -3/4" arbor). Requires coolant oil. Add $200.00 for 220v 50 Hz Export Model Shipping weight 305 lbs. FOB Redlands, California. |
$4,300.00
Buy from us and save $250.00 off the above price |
| 20" | Covington Heavy Duty A Great Saw for the Price |
Covington makes high performance saws for cutting glass or stone. The heavy welded steel chassis with separately welded inner frame eliminates warp. The one piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads. A quick return system which allows the carriage to be manually returned to any position. A six speed power feed with automatic shutoff. Over running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through stone. A wide cross feed which permits 8" of material to be slabbed without reclamping. A one piece arbor and flange mounted in housing with grit slinger. Heavy duty ball bearings, neoprene sealed and greased for life. Completely assembled with 10" vise, 3/4 HP motor, and a 20" Gold Diamond Blade (.071 Core/.098 rim, 1" -3/4" arbor). Requires coolant oil. Add $200.00 for 220v 50 Hz Export Model Shipping weight 395 lbs. FOB Redlands, California. |
$4,600.00
Buy from us and save $300.00 off the above price |
| 24" |
Diamond PacificTR-24 These machines will be drop-shipped directly to you by Diamond Pacific.  |
Easy to operate. Reliable performance cut after cut.
See details and closeups of this rugged industrial type slab saw with features that make it the best saw available today.
Precision is the key word in the manufacture of the systems components.
Exacting tolerances insure perfect matching of hardened bearings, rollers, and rails.
The factory alignment of rails to the blade is within .015".
The estimated life of these components is approximately 2500 hours.
All components are readily accessible for preventative maintenance, minor adjustments and replacement, if required.
The "V"-Guide Rail System is standard equipment on this machine.
The powerglide hydraulic feed system cuts faster than any screw fed system.
Cutting agate at about 3 square inches per minute and onyx at about 10 square inches per minute.
Stones of other hardness fall between these figures.
The filter and recirculating system of this machine is capable of moving large volumes of
clean oil over the cutting surface while cooling and lubricating at the same time.
The system consists of a 9 gallon holding tank with 3 settling chambers, filter,
submersible pump, coolant guide tubes and saw wash attachment.
Has a 1" arbor shaft.
The heavy duty 23-gal capacity tank is made of 3/16" steel plate and measures 60" long by 30.5" wide by 17.75" deep;
The hardened faced jaws of the vise open up to 8" and the crossfeed is 6-1/2".
It comes with a 1-1/2 HP heavy duty motor, hydraulic feed and 3-stage filter and recirculation systems. Overall height is 43", vice opening is 17", and depth of cut is 8-3/4" with 6" flange. Shipping weight 890 lbs. Crating fee (extra)...add $430.00. Allow 3 to 4 weeks prior to shipping. The 1-1/2 HP motor 110v requires a 30 amp circut and recepticle. [Diamond Pacfic no longer includes a blade. Blade must be ordered separately.] We recommend the 24" MK-303 Professional Saw Blade having a .100 rim thickness... add $777.00 add $777.00 Add 15 lbs ship. wt. per saw blade. The saw should be used with oil as a coolant. We recommend using Roc-Oil, a food grade mineral oil... add $30.50 per gallon Add 10 lbs ship. wt. per gallon. |
$9,650.00 220V 60 Hz $10,000.00 220V 50 Hz Buy from us and save $300.00 off the above prices |
| 24" | Covington Heavy Duty A Great Saw for the Price |
Covington makes high performance saws for cutting glass or stone. The heavy welded steel chassis with separately welded inner frame eliminates warp. The one piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads. A quick return system which allows the carriage to be manually returned to any position. A six speed power feed with automatic shutoff. Over running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through stone. A wide cross feed which permits 8" of material to be slabbed without reclamping. A one piece arbor and flange mounted in housing with grit slinger. Heavy duty ball bearings, neoprene sealed and greased for life. Completely assembled with vise, 1 HP motor, and a 24" Gold Diamond Blade (.080 Core/.110 rim, 1" -3/4" arbor) Requires coolant oil. Add $300.00 for 220v 50 Hz Export Model Shipping weight is 445 lbs. for 12"-jaw vice or 475 lbs. for 18"-jaw vice FOB Redlands, California. |
110v 60Hz with 12" vice $5,750.00 110v 60Hz with 18" vice $5,950.00 Buy from us and save $300.00 off the above price |
| 30" | Covington Heavy Duty A Great Saw for the Price |
Covington makes high performance saws for cutting glass or stone. The heavy welded steel chassis with separately welded inner frame eliminates warp. The one piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads. A quick return system which allows the carriage to be manually returned to any position. A six speed power feed with automatic shutoff. Over running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through stone. A wide cross feed which permits 8" of material to be slabbed without reclamping. A one piece arbor and flange mounted in housing with grit slinger. Heavy duty ball bearings, neoprene sealed and greased for life. Completely assembled with 18" vise, 1.5 HP 220v motor, and a 30" Gold Diamond Blade (.095 Core/.115 rim, 1" arbor). Requires coolant oil. Add $250.00 for 220v 50 Hz Export Model Shipping weight 680 lbs. FOB Redlands, California. |
110v 60Hz $8,250.00
220v 50Hz Export $8,400.00 Buy from us and save $300.00 off the above price |
| 36" | Covington Heavy Duty A Great Saw for the Price |
Covington makes high performance saws for cutting glass or stone. The heavy welded steel chassis with separately welded inner frame eliminates warp. The one piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads. A quick return system which allows the carriage to be manually returned to any position. A six speed power feed with automatic shutoff. Over running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through stone. A wide cross feed which permits 8" of material to be slabbed without reclamping. A one piece arbor and flange mounted in housing with grit slinger. Heavy duty ball bearings, neoprene sealed and greased for life. Completely assembled with 26" vise, 2 HP 220v motor, and a 36" Gold Diamond Blade (.095 Core/.115 rim, 1" arbor). Requires coolant oil. Shipping weight 1200 lbs. FOB Redlands, California. |
220v 60 Hz usA $12,000.00 220v 50 Hz Export $12,300.00 Buy from us and save $400.00 off the above price |
| 36" |
Diamond Pacific TR-36 former F-36 Model 
Similar to the other TR Models but much bigger These machines are a special order and will be drop-shipped directly to you by Diamond Pacific. |
Easy to operate. Reliable performance cut after cut.
Rugged industrial type features make it the best saw available today.
Precision is the key word in the manufacture of the systems components.
Exacting tolerances insure perfect matching of hardened bearings, rollers, and rails.
The factory alignment of rails to the blade is within .015".
The estimated life of these components is approximately 2500 hours.
The powerglide hydraulic feed system cuts faster than any screw fed system.
The filter and recirculating system of this machine is capable of moving large volumes of
clean oil over the cutting surface while cooling and lubricating at the same time.
Special features:
Crating fee (extra)...add $676.00. (add additional $350 if going to UK and Australia for special crating requirements.) Crate size is approximately 6' high x 5' wide x 10' long Allow 6 to 8 weeks plus for delivery time. Diamond Pacfic no longer includes a
blade
Blade must be ordered separately |
$18,000.00 220V 60Hz Buy from us and save $400.00 off the above price $18,500.00 240V 50Hz Buy from us and save $500.00 off the above price |
For smaller saws, see Trim Saws
DISCOUNTS
Purchase two saws,
receive an additional 5% Discount.
Purchase three saws,
receive an additional 7% Discount.
Purchase four or more saws,
receive an additional 10% Discount.
